Sydney Performance Parts & Tyres

Turbosmart Constant Tension Hose Clamps – 1.625" to 2.375" (41–60mm), Pack of 2 (TS-HCT-M050)

Turbosmart Constant Tension Hose Clamps – 1.625" to 2.375" (41–60mm), Pack of 2 (TS-HCT-M050)

SKU: TS-HCT-M050

AUD 40.99

In stock

Brand: Turbosmart

The Turbosmart Constant Tension Hose Clamp TS-HCT-M050 is a spring-loaded clamp for hose outside diameters from 1.625" to 2.375" (41–60mm), supplied as a pack of two. This size covers 1.50" to 2.00" silicone hose – the common range for turbo inlets, blow off valve returns, small intercooler plumbing and larger coolant lines.

Why constant tension?

Every time an engine heats up and cools down the hose and the pipe underneath expand and contract at different rates. A conventional worm-drive clamp is fixed at one diameter, so each heat cycle leaves it a little looser – which is why hoses that were tight when fitted start to seep or blow off months later. A constant tension clamp keeps a spring-loaded load on the hose at all times, taking up that movement so the joint stays sealed through thousands of heat cycles without re-tightening.

Turbosmart features

  • Convoluted dual spring-action outer band – maintains clamping load as the hose and pipe expand and contract.
  • Dual-bead inner shell – spreads the load evenly around the hose for a leak-free seal without a pressure point.
  • Flanged edges – protect the hose from being cut or damaged under load.
  • Fits a 5/16" socket or flat-blade screwdriver; tighten to 5.6 Nm (50 in-lb).
  • Sold as a pack of 2.

Typical uses

  • Turbo inlet and compressor-outlet hoses
  • Blow off valve recirculation hoses
  • Small intercooler and charge-pipe joints
  • Radiator and larger coolant hoses

Suits Turbosmart silicone hose

Matches the outside diameter of Turbosmart's 1.50" to 2.00" silicone hose, including the 1.50" 90° elbow, 1.75" 90° elbow, 2.00" 90° elbow and 2.00" double hump hose, plus the matching ends of the 1.50" to 2.00", 1.75" to 2.00" and 1.75" to 2.25" reducers. Always measure the hose outside diameter (not the pipe) when choosing a clamp size.

Other sizes

247 Storefront is an authorised Turbosmart stockist. Ships from Sydney, Australia.

Part number
TS-HCT-M050
Brand
Turbosmart
Type
Constant tension hose clamp
Clamping range
1.625" – 2.375" (41 – 60mm)
Quantity
Pack of 2
Drive
5/16" socket or flat-blade screwdriver
Torque
5.6 Nm (50 in-lb)
Features
Convoluted dual spring-action outer band, dual-bead inner shell, flanged edges

Related products