Sydney Performance Parts & Tyres

Turbosmart Straight Silicone Reducer – 3.00" to 3.50" (76–89mm), Black (TS-HR300350-BK)

Turbosmart Straight Silicone Reducer – 3.00" to 3.50" (76–89mm), Black (TS-HR300350-BK)

SKU: TS-HR300350-BK

AUD 35.99

In stock

Brand: Turbosmart

The Turbosmart TS-HR300350-BK is a straight silicone reducer that steps a 3.00" (76mm) connection up to 3.50" (89mm) – one of the most common transitions on larger turbo builds, where 3" intercooler piping meets a 3.5" turbo inlet, airbox or intercooler end tank. Built from the same multi-layer reinforced silicone Turbosmart use across their intercooler and intake range, it is rated to 220 PSI and -50°C to 170°C, so it is suited to high-boost pressure-side use as well as intake duty.

Why choose Turbosmart silicone

  • Multi-layer reinforced construction – 5mm wall thickness resists ballooning and collapse under boost or vacuum.
  • 220 PSI pressure rating – comfortably above the demands of any street or track turbo application.
  • -50°C to 170°C temperature range – handles hot charge air and engine-bay heat without softening or hardening over time.
  • Resistant to oil, coolant and ozone – won't crack, swell or perish like rubber hose.
  • Smooth internal bore – minimal flow restriction across the step.

Typical uses

  • Joining 3.00" intercooler piping to a 3.50" end tank or throttle body
  • Adapting a 3.50" turbo inlet or intake tube to a 3.00" compressor housing or MAF housing
  • Stepping up to a larger-bore intake on big-turbo builds

Size

  • Small end: 3.00" (76mm) ID
  • Large end: 3.50" (89mm) ID
  • Straight – no bend
  • Colour: Black

Matching clamps

Use a Turbosmart Constant Tension Clamp 2.500–3.375" (TS-HCT-M075) or 2.750–3.625" (TS-HCT-M081) on the 3.00" end and a 2.750–3.625" (TS-HCT-M081) on the 3.50" end for a leak-free seal that compensates for heat cycling.

Other sizes

Nearby straight reducers: 3.00" to 3.25", 2.75" to 3.50", 3.00" to 3.75" and 3.00" to 4.00".

247 Storefront is an authorised Turbosmart stockist – genuine Turbosmart silicone, shipped from Sydney.

Part Number
TS-HR300350-BK
Brand
Turbosmart
Type
Straight silicone reducer
Small End ID
3.00" (76mm)
Large End ID
3.50" (89mm)
Construction
Multi-layer reinforced silicone, 5mm wall
Pressure Rating
220 PSI
Temperature Range
-50°C to 170°C
Colour
Black

Related products