Sydney Performance Parts & Tyres

Turbosmart Straight Silicone Reducer – 2.75" to 3.00" (70–76mm), Black (TS-HR275300-BK)

Turbosmart Straight Silicone Reducer – 2.75" to 3.00" (70–76mm), Black (TS-HR275300-BK)

SKU: TS-HR275300-BK

AUD 32.99

In stock

Brand: Turbosmart

Turbosmart Straight Silicone Reducer – 2.75" to 3.00"

Step a 2.75" (70mm) pipe up to a 3.00" (76mm) pipe in one clean, straight joint. Part number TS-HR275300-BK is a genuine Turbosmart silicone reducer in black, built for intercooler piping, cold-air intakes and turbo plumbing where two different pipe sizes have to meet without steps, leaks or collapse.

Why Turbosmart silicone

  • Multi-layer reinforced construction with a 5mm wall – holds shape under boost and vacuum where cheap hose balloons or sucks closed.
  • Rated to 220 PSI – ample margin for high-boost turbo and supercharger applications.
  • -50°C to +170°C operating range – handles engine-bay heat and charge-air temperatures long term.
  • Resists oil mist, fuel vapour, ozone and UV so it won't harden, crack or swell over time.
  • Smooth bore for minimal flow restriction; clean, consistent finish.

Typical uses

  • Joining 2.75" (70mm) factory-style piping to 3.00" aftermarket intercooler or intake pipe.
  • Throttle body and intercooler end-tank transitions after a core or piping upgrade.
  • Small-step joints where a straight coupler is slightly too tight on one side.

Size

  • Small end: 2.75" (70mm) ID
  • Large end: 3.00" (76mm) ID
  • Shape: straight reducer
  • Colour: black

Recommended clamps

Use a constant tension T-bolt clamp on each end for a leak-free seal that compensates for heat cycling: Turbosmart TS-HCT-M075 (2.50"–3.375") suits both the 2.75" and 3.00" ends.

Need a bend instead?

The same 2.75"–3.00" step is available as a 45° reducer elbow or 90° reducer elbow.

Other sizes

247 Storefront is an authorised Turbosmart stockist – genuine parts, shipped from Sydney.

Part number
TS-HR275300-BK
Brand
Turbosmart
Type
Straight silicone reducer
Small end
2.75" (70mm) ID
Large end
3.00" (76mm) ID
Construction
Multi-layer reinforced silicone, 5mm wall
Pressure rating
220 PSI
Temperature range
-50°C to +170°C
Colour
Black

Related products