Sydney Performance Parts & Tyres

Turbosmart 45° Silicone Elbow – 0.75" (19mm) ID, Black (TS-HE45075-BK)

Turbosmart 45° Silicone Elbow – 0.75" (19mm) ID, Black (TS-HE45075-BK)

SKU: TS-HE45075-BK

AUD 29.99

In stock

Brand: Turbosmart

The Turbosmart 45° Silicone Elbow in 0.75" (19mm) is a small-bore, high-quality silicone bend for routing coolant, heater, breather and oil-drain lines around tight engine-bay corners without kinking. Part number TS-HE45075-BK, black.

Why Turbosmart silicone?

  • Multi-layer reinforced construction with a 5mm wall – stays round under heat and pressure where rubber hose softens and collapses.
  • Pressure rated to 220 PSI and temperature rated from -50°C to 170°C, so it is well within its limits on any coolant, breather or oil-vent circuit.
  • Resistant to heat ageing, ozone and UV – won't go hard and crack like factory rubber hose.
  • Smooth bore for unrestricted flow; clean black finish that looks the part in a tidy engine bay.

Typical uses

  • Heater and coolant bypass hoses in 19mm
  • Breather and catch-can lines
  • Turbo oil-drain and water-line routing
  • Any 3/4" hose run that needs a gentle 45° change of direction

Size

0.75" (19mm) inside diameter, 45° bend, black. Turbosmart's constant tension clamps start at 1.97", so a good-quality standard worm-drive or spring clamp is the right fit for this size.

Other sizes

Also available in 1.25" (TS-HE45125-BK) and 2.75" (TS-HE45275-BK). Need a tighter turn? See the 1.00" 90° silicone elbow.

247 Storefront is an authorised Turbosmart stockist – genuine product, shipped from Sydney.

Part number
TS-HE45075-BK
Brand
Turbosmart
Type
45° silicone elbow
Inside diameter
0.75" (19mm)
Bend angle
45°
Colour
Black
Construction
Multi-layer reinforced silicone, 5mm wall
Pressure rating
220 PSI
Temperature range
-50°C to 170°C

Related products