Sydney Performance & Parts

Turbosmart TS-1 Turbocharger 7675 V-Band Reverse Rotation 0.96AR Externally Wastegated

Turbosmart TS-1 Turbocharger 7675 V-Band Reverse Rotation 0.96AR Externally Wastegated

SKU: TS-1-7675C-VR096E

AUD 3912.26

In stock

Brand: Turbosmart

TS-1 Turbocharger 7675 V-Band Reverse Rotation 0.96AR Externally Wastegated

Turbosmart TS Series Turbochargers – Smaller, Lighter, Faster

Turbosmart’s turbocharger series has been developed using advanced materials, precision engineering, and modern manufacturing techniques to create a range that meets the demands of both motorsport and performance enthusiasts alike.

Every turbocharger is supplied as a complete installation kit, including weld flanges, V-band clamps, gaskets, and oil feed and drain fittings for straightforward installation.

TS-1 Series Overview

The TS-1 series features oil-cooled turbochargers with lightweight investment-cast turbine housings and a proprietary bearing and shaft assembly designed for exceptional transient response.

An ultra-low rotating mass system is combined with aggressive compressor aerodynamics to deliver strong performance at lower shaft speeds, while a high-efficiency turbine wheel maintains airflow and power under sustained load.

Built on a full engine end-to-end design philosophy, the TS Series reduces back pressure and improves efficiency—delivering faster response than conventional turbocharger systems while maintaining strength, durability, and reliability.

Available Options

  • TS-1 oil-cooled turbochargers

  • TS-2 oil & water-cooled turbochargers

  • T3 and T4 flange configurations

  • V-Band options

  • Reverse rotation (selected sizes)

  • Multiple A/R options

  • Internal and external wastegate options

TS-1 Turbocharger 7675 V-Band Reverse Rotation 0.96AR Externally Wastegated Key Features

  • Exceptional transient response and rapid spool

  • 7+7 splitter wheel compressor aerodynamics

  • Lightweight 310 stainless steel investment cast turbine housings

  • Aluminium compressor covers for reduced weight

  • CFD-optimised housings for improved airflow and efficiency

  • 713C Inconel turbine wheel for extreme exhaust temperatures

  • VSR high-speed balancing for reliability and durability

  • Proprietary dual ceramic bearing system

  • Integrated iron backplate centre housing design

Specifications (model dependent)

  • Compressor inlet: 4” / 101.6mm

  • Compressor inducer: 76mm

  • Turbine inlet: V-Band (3.00”)

  • Turbine exducer: 75mm

  • Turbine A/R: 0.96

  • Turbine outlet: V-Band (3.50”)

  • Weight: 9.63kg / 20.23lbs

  • Horsepower range: 1200–1350HP

Related products